應用場景

Application

1、HJ-LM12SXDR型十二軸雙控鉆鑼一體機以鑼槽方式有效解決短槽孔鉆孔時歪、偏和不規則的品質問題同時可大幅度提高槽孔加工效率。

HJ-LM12SXDRTwelve-axis dual control machine can solve deviation and irregular shape of

SOLT by routing method,then to improve the efficiency of slot processing the same;

2、槽孔占比達到20%以上的電路板，改鉆槽孔為鑼工藝，槽孔越多提升率越明顯

The PCB SOLT be more than 20% of CNC,need to improvement in processing efficiency by

Changing the drilling to routing;

3、金屬包邊板，鉆鑼工序在同一工作臺面完成，節省上下板人力投入，無需重新定位

For metal-cald PCB and can to drilling and routing which done on the machine the same.

no need to loading and unloading then to save time and cost;

4、應用于小批量的單鉆或者鑼加工，作為傳統鉆機或者鑼機使用

Used for small batch drilling and routing the same for conventional CNC amchine.

5、針對短槽歪移問題，此設備可以完全解決和預防

The machine can to solving solt deformation by the machine;

6、可以直接實現6.5-13mm的超大刀直接一次鉆。

Machine can to drilled out diameter 6.5-13mm directly.:

設備主要性能

Equipment Main performance

1、雙套獨立控制系統，雙臺面獨立運動，Window10操作系統，控制系統采用華建自主知識產權Delta5.0

Two sets of independent control system to support double table independent ,Window 10 operation system to controlmachine base on own R&D Delta 5.0

2、兩個不同加工文件，可分別在兩個臺面采用不同的加工模式單獨加工，可鉆或鑼

Two independent sets can to ndependent operating by two different processing file,drilling and routing which doing the same time

3、小批量電路板和樣板的加工，可節約成本

Cost-effective for processing small batch and sample of PCB

4、機床及運動軸基準平臺全部為天然黑色花崗石，精度高，受外界環境變化小

Machine frame and motion axis reference plane made entirely of natural black aranite providing high precision and minimal sensitivity to external environment changes

5、Z軸傳動采用世界[敏感詞]產品日本NSK或THK公司的滾珠絲桿

The Z-axis drive uses ball screws from world-renowned NSK or THK brands.

6、導向采用日本THK和德國施耐博格直線導軌

Guiding system use THK brand from Japan and Germany Schneeberager for liner guides

7、鉆氣浮主軸20萬轉每分鐘，鑼主軸6萬轉每分鐘

Drilling spindle speed:200K.rpm air-floating spindle.routing spindle speed:60K.rpm

8、自動測量刀具長度，接觸式斷刀檢測

Automatic measuring the length of tool and contact-based tool breakage detection